The information section can be found here

1.Basic information

Carved wooden façade for furniture No. 4 is milled on CNC machines. For small orders, we use standard solid wood furniture boards with a thickness of 18,20,25,30,38,40 mm. A solid wood façade (hardwood) is not cheap, so take the time to choose a décor. We cannot show options in the store that will satisfy absolutely everyone. Almost all décor elements can be changed to your liking, increased or decreased in size, or added and replaced center-corner décor, for example. Almost always, revision is required. If you choose ready-made 3d models from the catalog of carved décor, then it’s free. In the catalog section “Carved décor (overlays)” you can choose additional décor elements.

Something special

If you need something special, take a look at the “Our Services” section. When viewing the model, you will be able to preview how your product will look. We want to say once again that the 3d model uploaded to the server is specially made with a small number of polygons. This is necessary to reduce the load and increase the download speed on mobile phones. Before paying for the façade, we will send you a rendering of the model (3D visualization), and only after approval we will start working. For furniture manufacturers, we can make overhead décor separately, or we can make only a panel. The connection of rack parts (frames, strapping) can be 90 ° and 45 °. The width of the frame (strapping) is 72mm, all sizes can be discussed.

• Material.

There should be no problems with the choice of material. The grouping is carried out not by the type of wood, but by the thickness of the material. Choose a size that matches the thickness of the 3d model. If the material you need is not on the list, we will try to find it. Do not forget, high-quality wood is not cheap. If you are not going to use clear wax oils, you should take a closer look at less valuable types of wood. These recommendations are not for furniture manufacturers, they understand this (perhaps better than us :-), they just need to be no worse).

• Coating

To cover the carved wooden façade for furniture, we use only oil-wax, e.g. hard wax furniture, tung, as well as oil for the countertop. Here, too, there are options for reducing the cost of the furniture façade. For example, there are two European brands, the price difference is almost double. We also accept orders for unpainted facades, at the request of the customer.

• Post-processing

Post-machining after CNC machining (optional options). After high-quality milling of the façade, the product is almost ready, but can be mechanically sanded. Sometimes manual grinding and processing of sharp corners is required, it depends on the relief of the décor and product requirements. Any cutter, even small, has a radius. If you need an acute angle in the relief, pruning is done only by hand. This also applies to working with coatings, when you have a rich imagination and opportunities, for example, aging (patina) and creating a decorative gilding effect.

• Zoom

You can browse the product and change sizes. By default, the slider changes the 3d model of the façade proportionally. To enter your size, you need to unlock the icon in the form of ” “, set your size (the button will appear) Save. After a short pause, the program will complete the calculation and the carved façade will be saved in your dimensions. It is better to order a carved wooden façade for furniture No. 4 with a thickness of 19mm, this is the optimal minimum.

2.The most important information (Price? )

The price of the finished furniture façade in the store is as realistic as possible. One of the options for reducing the cost of the product is materials. The price difference for 1M³ can exceed $ 2000. and much more. Furniture oils can vary greatly from brand to brand. Also, the price depends on the area of the treated surface and additional options. The higher the relief of the décor and density, the longer the processing time. Write to the mail, call and we will answer all your questions.